 |
|||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Trash Mortar Diverter
MTI Trash Mortar Diverter™ (#TMD 9548): 0.024" (0.6mm) thick high impact polystyrene strip formed with 3/16" (4.8mm) deep corrugations and bent into V-shape with 8.5" (229 mm) back leg and 5.5" (127 mm) front leg; weep holes at 2.5" (64 mm) on center in bottom of "V" and 1" (25.4 mm) up each leg.
Cavity Weep
MTI Cavity Weep™ (#CV 5010); 2.25" (57 mm) wide weep legs at 9 1/2" (241 mm) on center; continuous belt 1" (25.4 mm) wide; and total width of 6" (152mm).
Twenty Year Warranty
MTI's products are all covered by a 20 year limited warranty. Click here for details.
Trash Mortar Diverter™ is the only product that stops, holds, and encapsulates trash mortar and prevents bridging. Order Now!
Cavity Weep™ puts the weep holes at the lowest point of the wall - where the water is - and allows all the water to escape every time. Order Now!
Trash Mortar Diverter™ TMD 9548
It works because it encapsulates trash mortar, preventing
mortar bridging and promoting moisture flow and air venting. The “V” shape funnels
moisture toward the center of the cavity, away from the back side of the face brick and
the face of the back-up wall and downward to a weep system.
Cavity Weep™ CV 5010
It works
because it forms the bottom side of the bed joint of mortar and creates many “tunnel” weep holes at the lowest point of the cavity.