 |
|||||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Product Specifications
0.024" (0.6 mm) thick high-impact polystyrene strip formed with 3/16" (4.8 mm) deep corrugations, bent into L-shape, 9" (229 mm) wide by 5" (127 mm) high, to fit on top of footing and below the edge of a slab on grade. The system shall form a control joint between slab and wall and serve as a thermal break between the slab and footing and/or foundation.
Specific Installations
- CMU & Jumbo Brick Single Wythe Walls
- Below-Grade CMU Walls
- Below-Grade Poured Walls
- Below-Grade Restoration and Moisture Control
Twenty Year Warranty
MTI's products are covered by a twenty-year limited warranty. View Warranty!
FE 8555
Floor Edging™ works because it is a moisture barrier, thermal break and slip sheet. It allows moisture to pass by the edge of a concrete floor and away from living areas. It helps prevent shrinkage cracks by allowing the floor to move.
- Forms edge of floor at walls — block or poured.
- Separates edge of floor from walls — prevents attaching, moisture transfer and thermal transfer.
- Forms bottom side of floor.
- Separates bottom side of floor from substrate - prevents attaching, floor shrinkage cracking, and moisture transfer.
- Floor Edging can be used with expansion material.
Ordering and Shipping Information
| Product Name | Floor Edging™ |
| Product Number | FE 8555 |
| Piece Length (Feet) | 4 |
| Pieces per Bundle | 10 |
| Linear Feet per Bundle | 40 |
| Bundles per Box | 6 |
| Linear Feet per Box | 240 |
| Boxes per Pallet | 10 |
| Linear Feet per Pallet | 2400 |
Please call 1-800-879-3348 or e-mail info@mtidry.com to place your order today